Rf-t ZENiX CABINET Modular Control Panels

Monitoring and controlling system for fire dampers and smoke control systems

Modular concept, for controlling and monitoring small projects (a few dampers) to large scale projects (more than 1000 dampers)
Pre-wired cabinet, on labelled terminal blocks
Connection to BMS via BACnet IP
Optional 12’’ touchscreen, with dedicated programming by Rf-t, according to requirements
Supplied with detailed electrical plans
Ethernet switch with multiple ports
Supplied with a readily available power socket (e.g. for laptop)

Got a question about this product?

Email us or call us on (+353) 01 463 4300

Compatible Accessories

Product Overview

The ZENiX Cabinet is a range of modular control panels, offering a wide range of options to suit the requirements of your project. Its main task is to control and monitor fire and smoke control dampers. Depending on the size of the project, a number of master controllers are mounted on DIN-rails in the cabinet. Input and output modules can also be fitted as required. To improve the ease of installation, all devices in the cabinet are pre-wired and connected to terminal blocks at the bottom of the cabinet. The ZENiX Cabinet is also equipped with an ethernet switch (for connection to the BMS for example), a power socket (power supply for a laptop, for example) and power switch.

Please contact us for a ZENiX Cabinet control panel design tailored to your project.

As an option, the ZENiX Cabinet can also be supplied with a 12’’ touchscreen built into the door. The option includes a box PC, mounted onto the DIN rails and connected to the touchscreen. On the touchscreen you can check the status of the ZENiX system and all connected components. Several software options are available, allowing to monitor, control and test components (depending on permissions), or show the status of fire dampers onto a plan of the building.

The option LED G+R adds a green and red LED on the cabinet door, showing immediately the overall status of the system. Additional digital input and output modules can be fitted in the cabinet.

A ZENiX Gateway device allows the user to send out control commands directly from the BMS to all connected components.